Full width home advertisement

Post Page Advertisement [Top]

Super OBD2 Performance Chip Tuning Box for Petrol Fuel CarsSuper OBD2 Plug & Drive Performance Chip Tuning Box for Diesel Cars

How to Install and Calibrate the Super OBD2 Plug & Drive Performance Chip Tuning Box

1. Pull the key out from the ignition.

2. Find OBDII diagnostic connector in your car and Plug in Super OBD2 (normally located under the steering wheel within arm's reach)

3. Insert the key into the ignition and turn the key to the 2nd click to turn on the ignition (Do not start the car)

4. Press the reset button for about 5 seconds. After releasing the button, wait about 30-60 seconds (Nitro OBD2 will communicate and establish a connection with the ECU) and the LED light will flash rapidly.

5. Start the engine

6. Press and hold the Reset Button for another 5 seconds to complete the installation. The Super OBD2 Chip Tuning Box should be left plugged in.

No comments:

Post a Comment

Bottom Ad [Post Page]