This video shows you how to setup your KKL OBD2 USB Cable to be ready to use with 3rd party diagnostic software such as VCDS-Lite 1.2, NDS II for PC, Subaru SSM, TuneECU and more.
Before your cable can be used with diagnostic software, you will need to install your FTDI USB Drivers. In this video, after plugging the USB cable into the PC, the correct drivers were installed automatically.
Then the COM Port # is assigned and the latency timer is changed to 1. Test that your settings were saved by unplugging and plugging in the USB cable. The cable is now ready to use.
Operating System: Windows 10 64-Bit
Hardware Used: OBD Innovations KKL OBD2 USB Cable with FTDI FT232RL Chip
Source: https://youtu.be/kbMhyMa_Mi0
No comments:
Post a Comment